ABB ACS800-U2 Drive
The ACS800-U2 VFD is a free standing single drive that is compact enough for small spaces. This ABB drive includes a choke for harmonics filtering, IP21 standard and drive protection and is optimal for many different applications
ABB ACS800-U2 Features
- Power range 45 to 560 KW
- Free-standing drive with two mounting directions
- IP21 enclosure class
- Direct torque control (DTC) as standard
- EMC filter, choke and brake chopper
- Flexible I/O and encoder options
ACS800-U2 Options
Built In
- Brake chopper
- EMC filter for 1st environment, restricted distribution according to EN 61800-3
- EMC filter for 2nd environment, unrestricted distribution according to En 61800-3
- Analog and digital I/O extension modules
- Fieldbus modules
- Pulse encoder interface module
- Resolver Interface (Limited SW Support)
- Common mode filters for motor protection
Available options
- Contactor with emergency stop push button
- 1 0r 2 thermistor relays
- 3 PT100 relays
- Cable bottom entry and exit
- Custom terminal block
External Options
- Brake resistor
- Output du/dt filters
Why a IFS ABB Professional?
- Your own ABB drive professional consultant from start to finish
- Professional ABB drive configuration
- Certified ABB drive startups
- Rush Orders
ACS800-U2 Ratings and Dimensions
3-phase supply voltage 380, 400, 415, 460, 480, 500. Power ratings are valid at nominal voltage, 480 Vac 60 Hz
| Type Designation | Frame Size |
Input A |
Imax A |
I2N A |
PN Hp |
I2HD A |
PHD Hp |
Noise Level dBA |
Air Flow ft3/min |
Head Dissipation BTU/hr |
|---|---|---|---|---|---|---|---|---|---|---|
| ACS800-U2-0170-5 | R7 | 191 | 326 | 192 | 150 | 162 | 125 | 71 | 318 | 10100 |
| ACS800-U2-0210-5 | R7 | 243 | 384 | 240 | 200 | 192 | 150 | 71 | 318 | 12900 |
| ACS800-U2-0260-5 | R7 | 291 | 432 | 286 | 200 | 224 | 150 | 71 | 318 | 15300 |
| ACS800-U2-0270-5 | R8 | 299 | 480 | 316 | 250 | 240 | 200 | 72 | 718 | 15350 |
| ACS800-U2-0300-5 | R8 | 336 | 568 | 361 | 300 | 302 | 152 | 72 | 718 | 18050 |
| ACS800-U2-0320-5 | R8 | 424 | 588 | 435 | 350 | 340 | 152 | 72 | 718 | 23250 |
| ACS800-U2-0400-5 | R8 | 498 | 588 | 510 | 400 | 370 | 300 | 72 | 718 | 25950 |
| ACS800-U2-0440-5 | R8 | 543 | 840 | 545 | 450 | 490 | 400 | 72 | 718 | 26650 |
| ACS800-U2-0490-5 | R8 | 590 | 840 | 590 | 500 | 515(1) | 450 | 72 | 718 | 27600 |
| ACS800-U2-0550-5 | R8 | 669 | 1017 | 670 | 550 | 590(1) | 500 | 72 | 718 | 31100 |
| ACS800-U2-0610-5 | R8 | 702 | 1017 | 704 | 600 | 590(1) | 500 | 72 | 718 | 33000 |
Notes
(1)50% overload is allowed if ambient temperature is 30ºC or less, Overload is limited to 40% at 40ºC
Imax current available for 10 seconds at start.
I2N continuous base current at 40o C (104o F)
Overload cycle 110% 12N for 1 minute / 5 minutes allowed
I2HD continuous base current at 40o C (104O F
Overload cycle 150% I2HD for 1 minute / 5 minutes allowed.
Current ratings do not change with different supply voltages.
Horsepower ratings based on NEMA motor ratings for typical 4-pole motors (1800 rpm). Check motor nameplate current for compatibility.
ACS800-02 product is no longer available. If the -02 type product is required, select ACS800-U2-xxxx-x+0C111. This will delete the extension enclosure and force Bottom Entry/Exit. Adding +H350+H352 is not required.